Filter
Top Products
Chapter 3: Rackmount and Installation
21
c. The OSUI Selection Menu appears, indicating that the user
station is correctly installed.
4. Repeat steps 2 and 3 for each user station you want to connect to
the Paragon switch.
5. Connect a CIM and the desired server.
a. Connect the cable strands of an appropriate CIM to the
appropriate ports on a server:
P2CIM-APS2 (PS/2 compatible servers) or P2CIM-APS2-B
(IBM BladeCenter Management Module with PS/2 ports):
Plug the HD15 strand into the server’s HD15 VGA video port.
Plug the purple 6-pin mini-DIN keyboard strand into the server’s
6-pin mini-DIN keyboard port. Plug the light green 6-pin mini-DIN
strand into the server’s 6-pin mini-DIN mouse port.
P2CIM-ASUN (Sun compatible servers):
Plug the HD15 strand into the server’s HD15 VGA video port.
Plug the 8-pin mini-DIN strand into the server’s 8-pin mini-DIN
keyboard/mouse port.
P2CIM-AUSB, P2CIM-AUSB-C (USB compatible servers), or
P2CIM-AUSB-B (IBM BladeCenter Management Module
with USB ports):
Plug the HD15 strand into the server’s HD15 VGA video port.
Plug the USB Type A strand into one of the server’s USB Type A
ports.
P2CIM-APS2DUAL (PS/2 compatible servers):
Connect keyboard, monitor, and mouse cables attached to the
CIM to the appropriate 15-pin female video port and 6-pin
mini-DIN mouse and keyboard ports on the server.