Filter
Top Products
Chapter 6: Operation - User Functions
73
Instance 4: “B” user completely overlaps the path with “A” user's;
therefore, only the server 3-2 connected to UMT-3 is accessible to the
“B” user.
Switching between Previous and Next Channels
There are two ways for you to switch between active channels: one is
through the OSUI operation, and the other is through the “Up/Down
Channel” hot key combination, which enables quick access by bypassing
the OSUI. The availability of the “Up/Down Channel” function depends
on two requirements as described below.
The user station you operate must be “P2-EUST” or “P2-EUST/C”
with the following firmware version.
P2-EUST: firmware version 3EB or later
P2-EUST/C: firmware version 4EB or later
A P2-UST does not support this feature.