Filter
Top Products
Chapter 2: Quick Start
13
7. Set a unique Stacking Unit ID on the front panel of each Stacking
Unit.
a. Press the FUNC button to activate the Function Menu.
b. Press the
and buttons to select "Set Stack ID."
c. Press the ENT button to confirm your selection.
d. Press the
and buttons to assign the numeric ID. The
guideline of ID assignment is:
Assign 1 as the ID for the first Stacking Unit, which is directly
connected the Main Unit.
Assign 2 as the ID for the second Stacking Unit, which is
connected to the first Stacking Unit.
Assign 3 as the ID for the third Stacking Unit, which is
connected to the second Stacking Unit.
e. Press the ENT button to save the setting.
8. Turn OFF all Paragon II devices.
9. Turn on the Stacking Unit first. If there are multiple Stacking Units,
turn on the Stacking Units from the last one to the first one in
sequence.
10. Turn on the Main Unit.
Step (B): Connect User Stations
To connect one or more user stations
1. Connect a user station to the Main Unit.
a. Plug one end of a Cat5 UTP cable into User Port number 1 on
the back of the Main Unit.
b. Plug the other end of the cable into the RJ45 port on the back of
the user station.
2. Connect a power cord to the user station and turn it on.