Filter
Top Products
w
Ensure that the computers that you want to remotely
monitor have a version of a Norton product that
supports Remote Monitoring.
Norton 360 requires a Passkey to set up Remote
Monitoring. You must type the same Passkey for all
the computers that you want to remotely monitor.
After you set up Remote Monitoring, you can connect
any computer to your network and enter the same
Passkey. Norton 360 automatically identifies the
computerandconnectsittotheNetworkSecurity Map.
To set upRemote Monitoring
1
In the Norton 360 main window, click Settings.
2
In the Settings window, under DetailedSettings,
click MyNetwork.
3
IntheNetworkSecurityMaprow,clickConfigure.
4
On the left side of the NetworkSecurityMap
window, under RemoteMonitoring, click Setup.
5
In the RemoteMonitoringSetup window,type a
Passkey.
ThePasskeyshouldbebetween6and20characters
in length. The Passkey is case sensitive.
6
Under Choosethedefaultmodefor Computer
Discovery, select one of the following options:
Lets your computer always
discover other computers that
are connected to the network
Computer Discovery
always on
Lets your computer discover
other computers that are
connected to the network when
the Network Security Map
window is open
Computer Discovery on
only when Network
Security Map screen is
displayed
7
Click OK.
8
Set up Remote Monitoring for all other computers
that you want to monitor remotely.
383Protecting your homenetwork
About the NetworkSecurity Map