Filter
Top Products
computer increases the scan time which slows down
the network speed of your computer.
If you know that a specific device on your network is
safe, you can apply Full Trust level to this device. In
addition, you can exclude this specific device from
IntrusionPrevention scan.Whenyouexclude adevice
fromIntrusionPreventionscan,Norton360truststhis
device and does not scan any information that is
received from this device. This improves the network
speed of your computer and helps the trusted device
to access your device quickly.
w
You can exclude only full trusted devices that are on
the local subnet.
To exclude a device from Intrusion Prevention scan,
youmustensurethattheIPaddressofthedevicenever
changes. Norton 360 uses IP addresses to identify
deviceson yourhome network.Ifthe IPaddressof the
devicechanges,Norton360cannotidentifythetrusted
device that should be excluded from Intrusion
Prevention scan.
w
You can exclude a trusted device from Intrusion
Prevention scan only if you are sure that the device
does not have any security threats.
When you apply Full Trust to a device and exclude it
from Intrusion Prevention scan, the IP address and
MAC address of the device are added to the Trust
Control.
To exclude adevice fromIntrusion Preventionscan
1
In the Norton 360 main window, click Settings.
2
In the Settings window, under DetailedSettings,
click MyNetwork.
3
Under MyNetwork, in the NetworkSecurityMap
row, click Configure.
4
IftheNetworkSecurityOverviewwindowappears,
click OK.
395Protecting your homenetwork
About the NetworkSecurity Map