Filter
Top Products
5
In the NetworkSecurityMap window,do one of
the following:
1 To editthe trustlevel ofa device thatis onyour
network, in the network map, click the device.
1 To edit the trust level of a device that you
manually added, in the NetworkDetails
drop-down list, click TrustControl, and then
click the device.
6
Inthedevicedetailssection,intheTrustLevelrow,
click Edit.
7
In the EditDeviceTrustLevel window, click FULL
TRUST.
8
At the bottom of the EditDeviceTrustLevel
window, check ExcludefromIPSscanning.
9
In theExcludefromIPSScanningdialog box,click
Yes to confirm.
10
Click OK.
Removing devices from the Network Security Map
The NetworkSecurityMap windowlists the devices
that areconnected toyour network.You canremove a
device or acomputer from the Network Security Map.
You can purge all devices from the network map and
createanewlistofdevices.Forexample,youcanpurge
all the devices that were present in your previous
network before youconnect to a newnetwork. Ensure
that you disable Remote Monitoring before you purge
thenetworkmap.Norton360cannotpurgethenetwork
map when the Remote Monitoring is turned on. Also,
ensure that you close the NetworkSecurityMap
windowbeforeyoupurgethenetworkmap.Youcannot
purge the network map when the NetworkSecurity
Map window is open.
w
Norton 360 purges the devices that you add manually
in the Trust Control network depending upon their
trust level. It does not purge the devices that have a
trust level as Full Trust or Restricted.
Protecting your homenetwork
About the NetworkSecurity Map
396