Filter
Top Products
Instruction Set
3-75
RISC 16−Bit CPU
Table 3−17.MSP430 Instruction Set
Mnemonic Description V N Z C
ADC(.B)
†
dst Add C to destination dst + C → dst * * * *
ADD(.B) src,dst Add source to destination src + dst → dst ****
ADDC(.B) src,dst Add source and C to destination src + dst + C → dst ****
AND(.B) src,dst AND source and destination src .and. dst → dst 0 * * *
BIC(.B) src,dst Clear bits in destination .not.src .and. dst → dst −−−−
BIS(.B) src,dst Set bits in destination src .or. dst → dst −−−−
BIT(.B) src,dst Test bits in destination src .and. dst 0 * * *
BR
†
dst Branch to destination dst → PC −−−−
CALL dst Call destination PC+2 → stack, dst → PC −−−−
CLR(.B)
†
dst Clear destination 0 → dst −−−−
CLRC
†
Clear C 0 → C −−−0
CLRN
†
Clear N 0 → N − 0 −−
CLRZ
†
Clear Z 0 → Z −−0 −
CMP(.B) src,dst Compare source and destination dst − src ****
DADC(.B)
†
dst Add C decimally to destination dst + C → dst (decimally) ****
DADD(.B) src,dst Add source and C decimally to dst. src + dst + C → dst (decimally) ****
DEC(.B)
†
dst Decrement destination dst − 1 → dst ****
DECD(.B)
†
dst Double-decrement destination dst − 2 → dst ****
DINT
†
Disable interrupts 0 → GIE −−−−
EINT
†
Enable interrupts 1 → GIE −−−−
INC(.B)
†
dst Increment destination dst +1 → dst ****
INCD(.B)
†
dst Double-increment destination dst+2 → dst ****
INV(.B)
†
dst Invert destination .not.dst → dst ****
JC/JHS label Jump if C set/Jump if higher or same −−−−
JEQ/JZ label Jump if equal/Jump if Z set −−−−
JGE label Jump if greater or equal −−−−
JL label Jump if less −−−−
JMP label Jump PC + 2 x offset → PC −−−−
JN label Jump if N set −−−−
JNC/JLO label Jump if C not set/Jump if lower −−−−
JNE/JNZ label Jump if not equal/Jump if Z not set −−−−
MOV(.B) src,dst Move source to destination src → dst −−−−
NOP
†
No operation −−−−
POP(.B)
†
dst Pop item from stack to destination @SP → dst, SP+2 → SP −−−−
PUSH(.B) src Push source onto stack SP − 2 → SP, src → @SP −−−−
RET
†
Return from subroutine @SP → PC, SP + 2 → SP −−−−
RETI Return from interrupt ****
RLA(.B)
†
dst Rotate left arithmetically ****
RLC(.B)
†
dst Rotate left through C ****
RRA(.B) dst Rotate right arithmetically 0 * * *
RRC(.B) dst Rotate right through C ****
SBC(.B)
†
dst Subtract not(C) from destination dst + 0FFFFh + C → dst ****
SETC
†
Set C 1 → C −−−1
SETN
†
Set N 1 → N − 1 −−
SETZ
†
Set Z 1 → C −−1 −
SUB(.B) src,dst Subtract source from destination dst + .not.src + 1 → dst ****
SUBC(.B) src,dst Subtract source and not(C) from dst. dst + .not.src + C → dst ****
SWPB dst Swap bytes −−−−
SXT dst Extend sign 0***
TST(.B)
†
dst Test destination dst + 0FFFFh + 1 0 * * 1
XOR(.B) src,dst Exclusive OR source and destination src .xor. dst → dst ****
† Emulated Instruction