Filter
Top Products
Timer_B Operation
13-16 Timer_B
Output Example—Timer in Continuous Mode
The OUTx signal is changed when the timer reaches the TBCLx and TBCL0
values, depending on the output mode, An example is shown in Figure 13−13
using TBCL0 and TBCL1.
Figure 13−13. Output Example—Timer in Continuous Mode
0h
TBR
(max)
TBIFG
Output Mode 1: Set
Output Mode 2: Toggle/Reset
Output Mode 3: Set/Reset
Output Mode 4: Toggle
Output Mode 5: Reset
Output Mode 6: Toggle/Set
Output Mode 7: Reset/Set
TBCL0
TBCL1
EQU1 TBIFG EQU1 EQU0 Interrupt EventsEQU0