Filter
Top Products
90 DSView 3 Software Installer/User Guide
If you selected the privilege level attribute method in step 8, the default value shell will
appear in the field by default.
If you selected the group name custom attribute method in step 8, the default value raccess
will appear in the field by default.
b. If the TACACS+ service requires a protocol for authorization requests, type the protocol
in the Protocol field.
c. In the Attribute Name field, type the attribute name that the DSView 3 server will receive
after an authorization request.
If you selected the privilege level attribute method in step 8, the default value priv-lvl will
appear by default.
If you selected the group name custom attribute method in step 8, the default value
group_name will appear by default.
NOTE: The Cyclades ACS advanced console server uses the service “raccess” and the attribute “group_name”
for TACACS+ group implementation.
10. Click Next. If the external authentication service is added successfully, the Completed
Successful window will open.
11. Click Finish. The User Authentication Services window will open with the new service listed.
To change settings for the TACACS+ external authentication service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services
window will open.
3. Click the name of the TACACS+ service. The side navigation bar will change to include the
name of the TACACS+ service at the top and, below the name, the information you
may define.
4. Click Connection in the side navigation bar. The Authentication Service Connection Settings -
TACACS+ window will open.
a. Type a 1-64 character name for the TACACS+ authentication service.
b. Type the address of the TACACS+ host in dot notation format (xxx.xxx.xxx.xxx) or type
the DNS host name in the Server Address field.
c. Type the number of the port (from 1-65535) for connecting to the TACACS+ host in the
Port Number field. The default is port 49.
d. Click Save.
5. To change the authentication type and/or shared secret, click Settings in the side navigation bar.
The Authentication Service Authentication Settings - TACACS+ window will open.
a. Select the authentication type from the Authentication Type menu.