Filter
Top Products
Chapter 6: Authentication Services 93
4. Click Connection in the side navigation bar. The Authentication Service Connection Settings
window will open.
5. To change the name of the service:
a. Type a 1-64 character name in the Service Name field.
b. Click Save.
c. If that is the only change you are entering, click Close. Otherwise, continue with the
next steps.
6. To clear the RSA SecurID node secret for one or more DSView 3 servers:
a. Click the checkbox to the left of the server name. To select all DSView 3 servers on the
page, click the checkbox to the left of DSView Server at the top of the list.
b. Click Clear Node Secret. A confirmation dialog box will appear.
c. Confirm or cancel the operation.
7. To update the RSA configuration files used by one or more DSView 3 servers to communicate
with the RSA Authentication Manager software:
a. Click the checkbox to the left of the server name. To select all DSView 3 servers on the
page, click the checkbox to the left of DSView Server at the top of the list.
b. Click Update. The Update RSA Configuration File window will open.
c. To change the sdconf.rec configuration file, enter the path in the sdconf.rec field or
browse to the location.
d. To specify the advanced option sdopts.rec file for manual load balancing, enter the path in
the sdopts.rec field or browse to the location.
e. Click Save and then click Close.
The DSView Service may need to be restarted when the RSA configuration is updated