Filter
Top Products
114 DSView 3 Software Installer/User Guide
To add a target device:
1. In a Units View window containing target devices (see Accessing Units View windows on
page 98), click Add. If you are in a target device view window, the Add Target Device Wizard
will open. If you are in a mixed view window, the Add Unit Wizard will open. Click Next.
2. If you were in a mixed view window when you clicked Add, the Select Add Unit Procedure
window will open. Click Add a single target device. Click Next.
If you were in a target device view window when you clicked Add, go to the next step.
3. The Type in Device Settings window will open, where you may enter optional information:
name, address or fully qualified domain name, Telnet port and web browser URL.
4. Click Next. The Completed Successful window will open.
5. Click Finish.
Deleting Units
When you delete a unit, it is removed from the DSView 3 software database, and all associated
connections will also be deleted.
You may also choose to delete target devices that are no longer connected when you run the Resync
Wizard; see Topology synchronization options in the Resync Wizard on page 122.
To delete a power device, see Power Devices on page 147.
To delete a unit:
1. In a Units View window (see Accessing Units View windows on page 98), click the checkbox
next to the unit name. To delete all units on the page, click the checkbox to the left of Name at
the top of the list.
2. Click Delete. You are prompted to confirm the deletion.
3. Confirm or cancel the deletion.