Filter
Top Products
Reception Features
30
4
Printing Options
Center Mark
When this function is turned on,
marks are printed halfway down the
left side and at the top center of each
page received. This makes it easy for
you to position a hole puncher cor-
rectly when you file received messag-
es.
Limitation
❒ The center marks may deviate a lit-
tle from the exact center of the
edge.
Note
❒ You can turn this function on or off
with the User Parameters (Switch
02 Bit 1). See p.58 “User Parame-
ters”.
Checkered Mark
When this function is turned on, a
checkered mark is printed on the first
page of fax messages to help you sep-
arate them.
Note
❒ You can turn this function on or off
with the User Parameters (Switch
02 Bit 4) See p.58 “User Parame-
ters”.
TSI Print
Usually the sender's Fax Header is
printed on received messages. If the
sender has not programmed their Fax
Header, you will not be able to identi-
fy them. However, if you turn this
function on, the sender's Name or Fax
Number is printed instead so you can
find out where the message came
from. See p.58 “User Parameters”
(Switch 02 Bit 3)
ND1X00E5
StellaCEN-advanced_V4_FM.book Page 30 Tuesday, July 17, 2001 1:01 PM