Filter
Top Products
Getting Started
6
1
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See Chapter 2 “Settings
You Can Change with the User
Tools” in the System Settings man-
ual.
-
--
-Power switches
This machine has two power switch-
es: See p.2 “Guide to Components”.
❖
❖❖
❖ Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖
❖❖
❖ Main power switch
If the machine does not operate af-
ter turning on the operation
switch, check if the main power
switch is turned on. If it is off, turn
it on.
Important
❒ Fax files stored in memory can be
kept for 12 hours after the main
power is switched off if the ma-
chine has been on for at least a
week. However, if the surround-
ing temperature is low, the storage
time might be shorter.
❒ If you leave the main power switch
off for more than 12 hours, all fax
files in memory are deleted. See p.7
“Turning Off the Power”.
Turning On the Power
A
AA
A
Confirm that the power cord is
plugged into the wall outlet firm-
ly and the main power switch is
on.
B
BB
B
Turn on the operation switch. The
On indicator should light.
The panel display will turn on.
Note
❒ If nothing happens when you
turn on the operation switch,
make sure the main power
switch is turned on.
StellaCEN-basic_V4_FM.book Page 6 Thursday, July 19, 2001 1:39 PM