Filter
Top Products
User Tools Menu (System Settings)
33
3
❒ [Encrypt:]-[On]: If the authentica-
tion method is CRAM-MD5.
❒ [Encrypt:]-[Off]: If the authentica-
tion method is PLAIN, or
LOGIN.
❖
❖❖
❖ POP before SMTP
You can configure POP authentica-
tion (POP before SMTP).
Authentication prevents unau-
thorized access, by authenticating
with the POP server before send-
ing e-mail to the SMTP server.
• On
To enable POP server authenti-
cation before sending e-mail via
the SMTP server, set [POP before
SMTP] to [On].
E-mail is sent to the SMTP serv-
er after the time specified for
[Wait Time after Auth.:] has
elapsed.
•
Wait Time after Auth.: 300msec
• User Name:
• Password:
• Off
Limitation
❒ Enter [User Name:] using up to 63
alphanumeric characters. Spac-
es cannot be used.
❒ Enter [Password:] using up to 63
alphanumeric characters. Spac-
es cannot be used.
Note
❒ Default: Off
❒ Using the number keys, you can
set [Wait Time after Auth.:] from
zero to 10,000 milliseconds, in
increments of one millisecond.
❒ If you select [On], enter [Server
Name] in [POP3/IMAP4 Settings].
Also, check the port number for
[POP3] in [E-mail Reception Port].
❖
❖❖
❖ Reception Protocol
Specify Reception Protocol for re-
ceiving Internet faxes.
• Off
• POP3
• IMAP4
• SMTP
Note
❒ Default: Off
❖
❖❖
❖ POP3/IMAP4 Settings
Specify the POP3/IMAP4 [Server
Name:] for receiving Internet faxes.
The specified POP3 server name is
used for [POP before SMTP].
If DNS is in use, enter the host
name.
If DNS is not in use, enter the POP3
or IMAP4 server IP address.
• Server Name:
• Encrypt:
• Auto
• On
• Off
Limitation
❒ Enter POP3 or IMAP4 [Server
Name:] using to 127 alphanu-
meric characters. Spaces cannot
be used.
Note
❒ [Encrypt:]-[Auto]: Password en-
cryption is automatically set
according to the POP server
settings.
❒ [Encrypt:]-[On]: Encrypt pass-
word.
❒ [Encrypt:]-[Off]: Do not encrypt
password.