Filter
Top Products
Settings You Can Change with the User Tools
15
2
5. Energy Saver Level You can select the Energy Saver level.
❖
❖❖
❖ Level 1
• Power Consumption:
Reduced by about 5% compared to standby mode.
• Warm-Up Time:
about 5 seconds
❖
❖❖
❖ Level 2
• Power Consumption:
Reduced by about 40% compared to standby mode.
• Warm-Up Time:
about 10 seconds
❖
❖❖
❖ Level 3
• Power Consumption:
Reduced by about 80% compared to standby mode.
• Warm-Up Time:
about 20 seconds
Note
❒ Default: Level 2
6. Auto Off Timer The machine turns itself off automatically to conserve energy after
your job is finished, after the selected time is up. This function is
called “Auto Off ”. The time can be set from 1 to 240 minutes.
Note
❒ Default: 30 minutes
❒ Auto Off might not be effective when an error message is dis-
played.
❒ To return to the ready condition from Auto Off, the machine re-
quires the same warm-up time as the time for becoming ready
after power is turned on.
❒ When the machine receives a fax or printer data in Auto Off
mode, it automatically prints the fax or printer data.
7. AOF(Keep It On.)
Note
❒ For details about this function, contact your service representa-
tive.
8. Tray Paper Size Select the size of the paper set in the paper tray.
Reference
See “Changing the Paper Size” in the Copy Reference manual.
11Display Contrast You can adjust the brightness of the panel display.
12Measurement Unit You can select the unit of measurement.
Note
❒ Default: inch
Menu Description
StellaC1a-EN-SysF_V4_FM.book Page 15 Wednesday, September 12, 2001 4:16 PM