Filter
Top Products
Using the Printer Function
54
5
H
HH
H
Select the [NetWare] check box,
and then click [Next >].
I
II
I
Click [Bindery Mode], enter the file
server name in the [File Server
Name:] box, and then click [Next >].
• In the [File Server Name:] box, en-
ter the file server name (up to 47
alphanumeric characters) of the
server to make the print server.
You can also click [Browse…] to
select a file server in the
[Browse…] dialog box.
J
JJ
J
Enter the print server name in the
[Print Server Name:] box, the printer
name in the [Printer Name:] box,
and the print queue name in the
[Print Queue Name:] box, then click
[Next >].
• In the [Print Server Name:] box,
enter the name of the NetWare
print server using up to 47 char-
acters.
• In the [Printer Name:] box, enter
the name of the NetWare print-
er using up to 47 characters.
• In the [Print Queue Name:] box,
enter the name of the print
queue to be added to NetWare.
K
KK
K
After confirming the settings,
click [Next >].
The settings take effect, and NIB
Setup Tool closes.
L
LL
L
Quit SmartDeviceMonitor for
Admin.
M
MM
M
Restart the printer.
Note
❒ To make sure the printer is cor-
rectly configured, enter the fol-
lowing from the command
prompt:
F:> USERLIST
❒ If the printer works as config-
ured, the name of the print serv-
er appears as an attached user.
NetWare 4.x, 5/5.1, 6
Important
❒ You must set up the print server
using NDS mode in NetWare 4.x,
5/5.1, 6.
❖
❖❖
❖ To use NetWare 5/5.1, 6
• Use the printer as a print server.
Do not use it as a remote printer
in a PureIP environment.
• If you use PureIP, configure the
machine to use TCP/IP. For
more information about how to
make the settings, see p.15 “Set-
ting Up the Machine on a Net-
work”.
A
AA
A
Log on to the file server as an ad-
ministrator, or equivalent.
B
BB
B
Start SmartDeviceMonitor for
Admin.
C
CC
C
On the [Group] menu, point to
[Search Device], and then click
[IPX/SPX] or [TCP/IP].
A list of machines appears.
D
DD
D
In the list, select the printer for
which you want to change config-
uration.
E
EE
E
On the [Tools] menu, click [NIB Set-
up Tool].
NIB Setup Tool starts.
Reference
If you use NetWare 5/5.1 or
NetWare 6 in a PureIP environ-
ment, see p.56 “Using PureIP in
the NetWare 5/5.1, 6 environ-
ment”.