Filter
Top Products
User Tools (System Settings)
16
2
Settings You Can Change with the User Tools
Reference
For details about how to access the user tools, see p.15 “User Tools Menu
(System Settings)”.
System Settings
Menu Description
1. Function Priority You can specify the mode (Copier or Fax) to be displayed immedi-
ately after the operation switch is turned on or System Reset mode
is turned on.
Note
❒
Default:
Copier
2. CopyCount Display The copy counter can be set to show the number of copies made
(count up) or the number of copies remaining to be made (count
down).
Note
❒
Default:
Up
3. System Reset The machine returns to its prioritized mode automatically after
your job is finished. This function is called “System Reset”. When
you set the time, select “1. On/Off” to “On”, and then set “2. Tim-
er” to the desired time. The time can be set from 10 to 999 seconds.
Note
❒
Default: On (
60 seconds
)
❒
You can specify the prioritized mode with the user tools. See
“1. Function Priority”.
4. Energy Saver Timer The machine enters Low Power mode automatically after your job
is finished, after the selected time. The time can be set from 1 to 240
minutes.
In Low Power mode, power consumption is reduced by 5% com-
pared with Standby mode.
Note
❒
Default:
15 minutes
❒
Energy Saver might not be effective when an error message is
displayed.
❒
When the machine receives a fax or printer data in Energy Sav-
er mode, it automatically prints the fax or the printer data.
Stella-EN-SysF_V4_FM.book Page 16 Wednesday, July 4, 2001 1:29 PM