Filter
Top Products
10
Turning On the Power
This machine has two power switch-
es.
❖
❖❖
❖ Operation switch (right side of the
control panel)
Press to activate the machine.
When the machine has finished
warming up, you can operate the
machine.
❖
❖❖
❖ Main power switch (left side of the ma-
chine)
Turning off this switch makes the
main power indicator on the right
side of the control panel go off.
When this is done, machine power
is completely off.
When the fax unit is installed, fax
files in memory may be lost if you
turn this switch off. Use this switch
only when necessary.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use it for a while.
See General Settings Guide.
Turning On the Main Power
A
AA
A
Make sure the power cord is firm-
ly plugged into the wall outlet.
B
BB
B
Turn on the main power switch.
The main power indicator goes on.
Important
❒ Do not turn off the main power
switch immediately after turn-
ing it on. Doing so may result in
damage to the memory, leading
to malfunctions.
Turning On the Power
A
AA
A
Press the operation switch.
The On indicator goes on.
Note
❒ If the power does not come on
when the operation switch is
pressed, check the main power
switch is on. If it is off, turn it on.
ABU020S
ABU021S
StellaC2_GBcopy_F1_pre_FM.book Page 10 Tuesday, December 16, 2003 4:39 PM