Filter
Top Products
Faxing
28
2
A
AA
A
Make sure that the machine is in
standby mode.
B
BB
B
Set your original and select any
scan settings you require.
C
CC
C
Press the Quick Dial key in which
the destination's number is pro-
grammed.
If the destination's name has been
stored, the name is shown on the
display. If it is not, the fax number
is shown.
Note
❒ If you make a mistake, press the
{
{{
{Clear/Stop}
}}
} key and try again.
❒ If you wish to dial another des-
tination, press the {
{{
{OK}
}}
} key and
dial another fax number.
D
DD
D
Press the {
{{
{Start}
}}
} key.
Using Speed Dials
You can specify destinations simply
by pressing the {
{{
{Speed Dial}
}}
} key and a
Speed Dial code (00 to 49).
You must store the destination's fax
number in a Speed Dial beforehand.
Additionally, you can store a name
for the destination in Speed Dials.
Note
❒ To register, edit, or delete Speed
Dial entries, see p.44 “Speed Dial”
❒ To check the contents of all Speed
Dials, print the Speed Dial list. See
Chapter 5, “Printing Reports/Lists”
in the Advanced Features manual.
❒ You can use codes 00-49 for Speed
Dials.
❒ If a search letter is registered with
a Speed Dial, you can find this
number quickly using the Tele-
phone Directory function. See
Chapter 3 “Telephone Directory”
in the Advanced Features manual.
❒ You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
A
AA
A
Make sure that the machine is in
standby mode.
B
BB
B
Set your original and select any
scan settings you require.
StellaCEN-basic_V4_FM.book Page 28 Thursday, July 19, 2001 1:39 PM