Filter
Top Products
Other Transmission Features
28
3
More Transmission Functions
If Memory Runs Out While
Storing an Original
If memory runs out while storing or
sending an original (free space reach-
es 0%), one of the following messages
appears. Press [Exit] to transmit
stored pages only.
• During Memory Transmission:
"
Memory is full. Scanning
will be stopped and only
scanned page(s)
will be
stored.
"
• During Parallel Memory Trans-
mission:
"
Memory is full. Cannot scan
more. Transmission will be
stopped.
"
Note
❒ In default, scanned pages are sent.
To change the settings to delete
scanned pages, contact your serv-
ice representative.
Parallel Memory Transmission
This function dials while the original
is being scanned. Standard Memory
Transmission stores the original in
memory, then dials the destination.
Parallel Memory Transmission al-
lows you to quickly determine
whether a connection was made. In
addition, this function scans the orig-
inal faster than Immediate Transmis-
sion. This is useful when you are in a
hurry and need to use the original for
another purpose.
Limitation
❒ Standard Memory Transmission is
used instead of Parallel Memory
Transmission in the following cas-
es:
• When the line is busy and could
not be connected to
• With Send Later
• When you store an original for
Memory Transmission while
another communication is in
progress
• When two or more destinations
are specified
• When the first page of an origi-
nal is placed on the exposure
glass
Note
❒ You can turn this function on or off
with the User Parameters. See p.76
“User Parameters” (switch 07, bit
2).
❒ Standard Memory Transmission
may be used instead of Parallel
Memory Transmission if there is
not enough free memory left.
❒ If you use this function, the Memo-
ry Storage Report will not be print-
ed.
❒ If the {
{{
{Clear/Stop}
}}
} key is pressed,
an original will jam or memory
will run out during Parallel Mem-
ory Transmission stops. The Trans-
mission Result Report is printed
and files are deleted.
❒ When Parallel Memory Transmis-
sion is used, the total number of
originals in “Fax Header Print” is
not automatically printed.
StellaC2-AEcombine-F_FM.book Page 28 Tuesday, January 13, 2004 1:22 PM