Filter
Top Products
Key Operator Tools
83
8
Key Operator Tools
Function name Description Reference
Memory Lock All received messages are
stored in memory and are
not automatically printed.
p.50 “Memory Lock”
Forwarding Transfers received mes-
sages to a registered re-
ceiver (forwarding
destination).
p.52 “Forwarding”
Changing User Parame-
ters
Allows you to change the
function settings to meet
your needs.
p.58 “User Parameters”
Printing User Parameter
List
Allows you to print and
check User Parameter set-
tings.
p.62 “Printing the User Parameter
List”
Personal Code Personal Code is used for
Restricted Access. When
turn the Restricted Access
on, users must enter the
Personal Code in order to
transmit documents.
p.63 “Personal Codes”
ID Code Registers the ID required
for using Polling Recep-
tion and Memory Lock.
p.66 “ID Code”
Line Type Registers the type of line
(Tone or Pulse) you are
connected to.
p.67 “Line Type”
PSTN Access Number Allows you to specify the
code used to access an
outside line when dialing.
p.68 “PSTN Access Number”
Memory File Transfer You can send all messages
currently stored in memo-
ry to another fax and have
them printed out there.
p.69 “Memory File Transfer”
RDS On/Off Allows you to switch on
RDS (Remote Diagnostic
system) to a service repre-
sentative can test your fax
machine remotely from a
service station, diagnose
the problem, and can
change your machine set-
tings to correct the prob-
lem.
p.70 “RDS (Remote Diagnostic Sys-
tem)”
StellaCEN-advanced_V4_FM.book Page 83 Tuesday, July 17, 2001 1:01 PM