Filter
Top Products
71
7. Key Operator Setting
Key Operator Tools List
You can also set the line type for the machine connection, program Memory
Lock ID, fax destinations, and many other items. In addition, you can check the
number of documents transmitted and received.
Function name Description Reference
Communication Page Count Checks the transmission and
reception, and totals on the
display.
p.72 “Counters”
Memory Lock Switches the Memory Lock to
on or off. To use it, program
an ID for printing a message
received in Memory Lock
mode.
p.75 “Memory Lock”
Forwarding Transfers received messages
to a programmed receiver
(forwarding destination).
p.72 “Forwarding”
Parameter Setting Allows you to change and
print the function settings to
meet your needs.
p.76 “User Parameters”
Program Special Sender By programming particular
receivers as Special Sender in
advance, you can have Special
Senders treated differently.
p.86 “Programming/ Chang-
ing Special Senders”
Program Memory Lock ID Programs an ID required for
Memory Lock reception.
p.91 “Programming a Memo-
ry Lock ID”
Select Dial/Push Phone Selects a line type when you
connect the machine to a G3
analog line.
Note
❒
This function is not availa-
ble in some areas.
p.92 “Selecting Dial/Push
Phone”
G3 Analog Line Selects whether you connect
the machine to a PABX that re-
quires an additional dial
number or to the telephone
network.
p.93 “G3 Analog Line”
StellaC2-AEcombine-F_FM.book Page 71 Tuesday, January 13, 2004 1:22 PM