Filter
Top Products
Copying from the Bypass Tray
27
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
Note
❒ If you do not use standard size
copy paper, you should enter ver-
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
Reference
For details about paper capacity in
the bypass tray, see p.12 “Copy Pa-
per”.
A
AA
A
Open the bypass tray.
B
BB
B
Push up the paper guide release
lever.
1.
Paper guide release lever
C
CC
C
Gently insert the copy paper face
down and adjust the paper
guides.
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Metric version • Vertical:
90 – 216mm
• Horizontal:
140 – 356 mm
Inch version • Vertical: 3.5" – 8.5"
• Horizontal: 5.5" – 14"
StellaC-EN-CopyF_V4_FM.book Page 27 Wednesday, July 4, 2001 11:23 AM