Filter
Top Products
Settings You Can Change with the User Tools
57
4
3. Set Ratio Select which Reduce, Enlarge or Input Ratio is shown on the panel
display with priority when the {
{{
{Reduce/Enlarge}
}}
} key is pressed.
Note
❒ Default:
• Ratio 1: 65% 8
1
/
2
"
×
11"
→
5
1
/
2
"
×
8
1
/
2
"
• Ratio 2: 78% 8
1
/
2
"
×
14"
→
8
1
/
2
"
×
11"
• Ratio 3: 93%
• Ratio 4: 129% 5
1
/
2
"
×
8
1
/
2
"
→
8
1
/
2
"
×
11"
• Ratio 5: 155% 5
1
/
2
"
×
8
1
/
2
"
→
8
1
/
2
"
×
14"
4. Copy Reset Timer The machine returns to its initial condition automatically after
your job is finished. When you set the time, select “1. On/Off” to
“On” and then set the “2. Timer” to the desired time. The time can
be selected from 10 to 999 seconds.
Note
❒ Default:
• 1. On/Off: On
• 2. Timer: 60 sec.
5. Orig. Orientation You can select the orientation of originals with Combine mode.
Note
❒ Default: Off
6. Bypass Paper Type You can select the type of paper for the bypass tray.
Note
❒ Default: Thick
7. Key Op. Tools If the machine is set to use the User Code function, operators must
enter their user codes before the machine can operate.
The machine can keep count of the number of copies made under
each user code.
1. User Code Access Specify whether to employ user codes to restrict copier users, and
manage the number of copies made.
Note
❒ Default: Off
2. Check Copy Counter You can check the number of copies made under each user code.
3. Print Counter List You can print counter lists.
4. Reset Counter You can check the number of copies made under each user code.
You can also reset each user code's counter to 0.
Menu Description
StellaC-EN-CopyF_V4_FM.book Page 57 Wednesday, July 4, 2001 11:23 AM