Filter
Top Products
User Tools (System Settings)
32
3
❖
❖❖
❖ Copier Auto Reset Timer
Specify the time to elapse before copier mode resets.
Note
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds using the number keys.
❖
❖❖
❖ Facsimile Auto Reset Timer (facsimile)
Specify the time to elapse before the facsimile mode resets.
Note
❒ Default: 30 sec.
❒ The time can be set from 30 to 999 seconds using the number keys.
❖
❖❖
❖ Scanner Auto Reset Timer (scanner)
Specifies the time to elapse before the scanner mode resets.
Note
❒ If [Off] is selected, the machine will not automatically switch to the user
code entry screen.
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds using the number keys.
❖
❖❖
❖ Set Date
Set the date on the machine's internal clock using the number keys.
❖
❖❖
❖ Set Time
Set the time on the machine's internal clock using the number keys.
Note
❒ Enter the time using the number keys.
❒ When the summer time function is set, you cannot make the time setting if
the current time falls inside the transition time zone. Set the time again lat-
er, or contact your service representative.
StellaC2_AEzen_F_FM.book Page 32 Monday, December 22, 2003 2:15 PM