Filter
Top Products
x
28
Using department codes to control the
number of copies made
<Copy management mode>
(Page 7-1)
29
Changing the language used in the
touch panel
<Language selection function>
(Page 7-111)
30
A full range of optional equipment is
available
• Document Processor (Page 8-1)
• Paper Feeder (Page 8-6)
* To prevent the copier from tipping over
because of weight in the copier and the
upper paper drawers[cassettes], the caster
kit must be installed at the bottom-most
Paper Feeder, when an optional Paper
Feeder is installed with the copier.
• Document Finisher (Page 8-6) • Key Counter (Page 8-13 • Fax Kit (Page 8-13
EspañolEnglish
CAUTION
To prevent the possibility of accidents due to tilting
the copier body, always turn the desk’s stopper
bolts until they make firm contact with the floor
during initial installation or whenever the machine
is moved.
CAUTION
To prevent the copier from tipping over, the
optional caster kit must be installed when the
copier is installed with an optional Paper Feeder.