Filter
Top Products
xii
Please read this Oper ation Guide before using the copier. Keep it close to the copier for easy reference.
Please read this Operation Guide before using the copier. Keep it close to the copier for easy
reference.
The sections of this guide and parts of the copier marked with symbols are safety warnings meant to protect the
user, other individuals and surrounding objects, and ensure correct and safe usage of the copier. The symbols and
their meanings are indicated below.
Symbols
The symbol indicates that the related section includes safety warnings. Specific points of attention are
indicated inside the symbol.
The symbol indicates that the related section includes information on prohibited actions. Specifics of the
prohibited action are indicated inside the symbol.
The z symbol indicates that the related section includes information on actions which must be performed.
Specifics of the required action are indicated inside the symbol.
Please contact your service representative to order a replacement if the safety warnings in this Operation Guide
are illegible or if the guide itself is missing. (fee required)
<Note>
An original which resembles a bank note closely may not be copied properly in some rare cases because this copier
is equipped with a counterfeiting prevention function.
DANGER: Indicates that serious injury or even death will very possibly result from insufficient
attention to or incorrect compliance with the related points.
WARNING: Indicates that serious injury or even death may result from insufficient attention to or
incorrect compliance with the related points.
CAUTION: Indicates that personal injury or mechanical damage may result from insufficient
attention to or incorrect compliance with the related points.
..........[General warning]
..........[Warning of danger of electrical shock]
..........[Warning of high temperature]
..........[Warning of prohibited action]
..........[Disassembly prohibited]
..........[Alert of required action]
..........[Remove the power plug from the outlet]
..........[Always connect the copier to an outlet with a ground connection]