Filter
Top Products
Section 9 TROUBLESHOOTING
9-16
3
Open the reversing section cover (shown as (2) in the
illustration) and remove the jammed paper without tearing
it.
NOTE
If the paper does happen to tear, remove any loose scraps
from inside the copier.
4
Close all open covers and replace the Duplex Unit in its
original position in the copier.
Misfeed in the optional Document Processor
If the following display appears, an original has misfed in the
Document Processor. In this case, the original set indicator will
blink red. Perform the following procedure to remove the jammed
original.
Inch specifications
Metric specifications
1
Remove all of the originals remaining in the original table.
2
Remove all of the originals that have been ejected onto the
original eject.
(2)