Filter
Top Products
Section 3 PREPARATIONS
3-5
3
Slide the paper all the way in, along the insert guides, as
far as it will go.
IMPORTANT!
• When you are setting paper onto the MP tray, make
sure that the side facing upward when the package is
opened is the side that is facing upward on the MP tray
as well. In addition, if the leading edge of the paper is
curled at all, straighten it out before setting it on the
MP tray.
• ALWAYS straighten out curled paper before setting it
on the MP tray (Amount of curl: Copy paper – under
10 mm, Envelopes – under 5 mm)
• If you are copying onto special paper, be sure to have
finished copies ejected onto the left tray. (See “Copy
eject location” on page 7-54.)
• Be sure to push the MP tray extension back in, and
open the insert guides as far as they will go BEFORE
closing the MP tray.
NOTE
When you are loading paper onto the MP tray, make sure
that the side to be copied onto is facing upward.
When printing onto envelopes
Set envelopes in the MP tray for printing.
Up to 10 envelopes can be set on the MP tray at a time.
For more details, refer to the Operation Guide for the Printer Kit.
Refer to the following table for the types and sizes of envelopes that
can be used in this machine.
Setting the envelopes on the MP tray
Perform the following procedure and set the envelopes on the MP
tray.
1
Open the MP tray.
2
Adjust the insert guides to fit the width of the envelopes
that are to be set on the MP tray.
Acceptable envelope types Size
Monarch 3
1/8" × 7 1/2"
Comm. #10 3
3/8" × 9 1/2"
Envelope DL 110 × 220 (mm)
Envelope C5 162 × 229 (mm)
Executive 7
1/4" × 10 1/2"
Comm. #9 3
7/8" × 8 7/8"
Comm. #6-3/4 3
5/8" × 6 1/2"
ISO B5 176 × 250 (mm)
Envelope C4 229 × 324 (mm)
Oufuku Hagaki 200 × 148 (mm)
YOUKEI 2 162 × 114 (mm)
YOUKEI 4 234 × 105 (mm)