Filter
Top Products
Section 7 COPIER MANAGEMENT
7-41
The state that the copier enters at the end of warm-up or when the [Reset] key is pressed is called the “initial mode”. The modes, functions and
other settings that are automatically pre-set for the initial mode are called “default settings”. These default settings are separated into two
categories: “Copy defaults” and “Machine defaults” and can be changed as desired to suit your copying needs.
Machine default settings
The following table indicates the machine default settings available in this copier. Change any or all of the settings as desired in order to make
the most effective use of your copier.
Default settings
Default setting Description
Available
settings
Factory
setting
Reference
page
Auto
drawer[cassette]
switching ON/OFF
If the paper in one drawer[cassette] runs out during copying,
the automatic drawer[cassette] switching function will
switch paper feed from the empty drawer[cassette] to
another drawer[cassette] that contains the same size of
paper in the same orientation for uninterrupted copying. To
enable this function, it is necessary to turn the related
setting “On”.
On / Off On 7-45
In order to prevent a drawer[cassette] that holds a different
type of paper from being switched to when the automatic
drawer[cassette] switching function is turned ON, it is
necessary to select “Feed same paper type” as well.
All types of paper /
Feed same paper
type
All types of paper
Paper size
(drawer[cassette]
No.3 & No.4)
Sets the size of paper that is loaded in drawers[cassettes]
No.3 and No.4.
If you want the size to be detected automatically, select
“Auto Detection” (Automatic size detection). If you want to
manually set the size of paper, select “Standard sizes”.
* This setting is only available when the optional Paper
Feeder is installed on your copier.
Auto Detection /
Standard sizes
Auto Detection 7-46
<If you select “Standard sizes”>
You can then select the paper size.
A3
A4
A4R
A5R
B4
B5R
11" × 17"
8
1/2" × 14"
11" × 8
1/2"
8
1/2" × 11"
– – –
Paper type
(drawer[cassette]
No.2 - No.4)
Sets and then displays the type of paper that is loaded in
drawers[cassettes] No.2 through No.4.
* The setting for drawer[cassette] No.3 and No.4 will only
be available when the optional Paper Feeder is installed
on your copier.
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
High quality
Custom 1 – Custom 8
Plain 7-47