Filter
Top Products
Section 7 COPIER MANAGEMENT
7-14
3
To set the maximum number of documents that can be
transmitted under this ID-code, press the “Counter limit”
key and proceed to the next step.
To allow unlimited fax transmission, press the “No limit”
key, and to cancel fax transmission privileges completely,
press the “Is not permitted” key and proceed to step 5.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Use the numeric keys on the keypad to enter the maximum
number of documents that can be transmitted under this
ID-code. The document limit can be set to any 1-page
increment up to 999,999.
Inch specifications
Metric specifications
5
Press the “Close” key.
The touch panel will return to the screen in step 2.
Copying restrictions (All)
Perform the following procedure when you want to set the
maximum number of copies that can be made under the
corresponding department ID-code.
NOTES
• This setting limits the maximum number of copies that
can be made in all copy modes (full color and black and
white).
• This setting will only be available when “On” is selected
as the “Copier function management ON/OFF”
setting.
1
Access the screen that contains the copy restriction setting
items.
(See “Accessing the copy management menu screen”
on page 7-3 or “Change restrictions for use” on
page 7-23.)
Inch specifications
Metric specifications
2
Select “Copy limitation (All)” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Copy limitation (All)” screen will be displayed.
Inch specifications
Metric specifications