Filter
Top Products
Section 7 COPIER MANAGEMENT
7-18
Printing restrictions (Full color)
Perform the following procedure when you want to set the
maximum number of full color printouts that can be made under
the corresponding department ID-code.
NOTES
• This setting will not be available when “Is not
permitted” is selected as the “Printing restrictions
(All)” setting.
• Even if a department ID-code does not exceed the limit
that is designated under this setting, further use of the
machine will be canceled or an error message will
appear if the limit that is designated under the
“Printing restrictions (All)” setting is exceeded.
1
Access the screen that contains the copy restriction setting
items.
(See “Accessing the copy management menu screen”
on page 7-3 or “Change restrictions for use” on
page 7-23.)
Inch specifications
Metric specifications
2
Select “Print. limit. (Full.Col.)” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Print. limit. (Full.Col.)” screen will be displayed.
Inch specifications
Metric specifications
3
To set the maximum number of full color printouts that can
be made under this ID-code, press the “Counter limit” key
and proceed to the next step.
To allow unlimited full color printing, press the “No limit”
key, and to cancel full color printing privileges completely,
press the “Is not permitted” key and proceed to step 5.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Use the numeric keys on the keypad to enter the maximum
number of full color printouts that can be made under this
ID-code. The printing limit can be set to any 1-page
increment up to 999,999.
Inch specifications
Metric specifications
5
Press the “Close” key.
The touch panel will return to the screen in step 2.