Filter
Top Products
Section 7 COPIER MANAGEMENT
7-48
MP tray settings display ON/OFF
Perform the following procedure to have the “MP tray setting”
screen appear whenever the “MP tray” key is pressed in the “Basic”
tab.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-44.)
Inch specifications
Metric specifications
2
Select “Check MP tray sizing” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Check MP tray sizing” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “On” key if you want to have the “MP tray
setting” screen appear.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Machine default
Sleep mode changing time
Check MP tray sizing
Paper type (Fixing set)
Select paper type(2sided)
Orig. Set Direction
On
Top Edge
60 Minute
CloseBack
Display and check MP tray setting mode when selecting.
Select "On" when using custom size or changing paper type.
Default setting - Machine default
Check MP tray sizing
Off
On