Filter
Top Products
Section 7 COPIER MANAGEMENT
7-55
Fax eject location
Sets the location for ejection of received faxes and for printed
reports.
NOTE
This setting is only available when the optional Fax Kit
and Document Finisher are installed on your copier.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-44.)
Inch specifications
Metric specifications
2
Select “Select FAX output mode” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Select FAX output mode” screen will be displayed.
Inch specifications
Metric specifications
3
Press the key that corresponds to the desired location.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report