Filter
Top Products
Section 7 COPIER MANAGEMENT
7-5
5
Use the numeric keys on the keypad to enter the
department ID-code that you want to register (up to 8
digits).
You can enter any number between “0” and “99999999”.
Inch specifications
Metric specifications
6
Press the “Close” key.
The touch panel will return to the screen in step 4.
7
Select “Name to display” under the “Setting item” column
on the left side of the touch panel and then press the
“Change #” key.
The “Name to display” screen will be displayed.
Inch specifications
Metric specifications
8
Enter the name for that department, and then press the
“End” key.
The touch panel will return to the screen in step 4.
Inch specifications
Metric specifications
NOTE
For information on how to enter the department name,
refer to “Entering characters” on page 7-112.
9
Once you are finished registering that department’s
ID-code and name, press the “Next” key.
Inch specifications
Metric specifications
NOTES
• Be sure to register both of the setting items above, If
you do not, an error will occur and you will be unable to
continue to the next step.
• If you attempt to register a department ID-code or a
department name that is already registered, an error
will occur and you will be unable to continue to the next
step. In this case, select a different ID-code and/or
name, as appropriate.