Filter
Top Products
Section 7 COPIER MANAGEMENT
7-75
Paper type (Auto color paper selection)
Perform the following procedure to select the types of paper that
will be available for selection under the APS (Auto Paper Selection)
mode when making color copies.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-67.)
Inch specifications
Metric specifications
2
Select “Pap. Type(Auto col. pap.)” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Pap. Type(Auto col. pap.)” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “On” key and then press the keys that correspond
to the types of paper you want to allow to be used under the
auto paper selection mode. If you do NOT want to limit the
types of paper that will be available for use in that mode,
press the “Off” key.
Inch specifications
Metric specifications
NOTES
• It is possible to select the type of paper that has been
designated for the drawer[cassette] currently in use.
• If you want to quit the displayed setting without
changing it, press the “Back” key. The touch panel will
return to the screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report
CloseBack
Default setting - Copy default
Pap. Type(Auto col. pap.)
Select paper type as requirement
of auto paper selection(color).
Off
On
Plain Color
High
quality
Custom 1
Custom 4
Custom 3
Custom 2
Custom 5
Custom 8
Custom 7
Custom 6
Recycled
Letterhead
Preprinted
Rough
Bond
Prepunched