Filter
Top Products
Section 7 COPIER MANAGEMENT
7-68
Making copy default settings
Perform the following procedure that corresponds to the desired
setting.
Exposure mode
Perform the following procedure to select between auto exposure
and manual exposure as the default copy exposure mode in the
initial mode.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-67.)
Inch specifications
Metric specifications
2
Select “Exposure mode” under the “Default menu” column
on the left side of the touch panel and then press the
“Change #” key.
The “Exposure mode” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “Manual” key or the “Auto” key, as appropriate.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report