Filter
Top Products
Section 7 COPIER MANAGEMENT
7-78
Cover drawer[cassette]
Perform the following procedure to set which drawer[cassette] will
be used to feed the cover sheets in the cover mode, the
booklet/stitching mode and the book to booklet mode.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-67.)
Inch specifications
Metric specifications
2
Select “Drawer for cover paper” [“Cassette for cover paper”]
under the “Default menu” column on the left side of the
touch panel and then press the “Change #” key.
The “Drawer for cover paper” [“Cassette for cover paper”]
screen will be displayed.
Inch specifications
Metric specifications
3
Press the key that corresponds to the desired
drawer[cassette].
Inch specifications
Metric specifications
NOTES
• If you want to quit the displayed setting without
changing it, press the “Back” key. The touch panel will
return to the screen in step 2.
• The setting for drawer[cassette] No.3 and No.4 will only
be available when the optional Paper Feeder is
installed on your copier.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report
CloseBack
Default setting - Copy default
Select drawer for cover paper.
Drawer for cover paper
3rd paper
4th paper
2nd paper
1st paper MP tray