Filter
Top Products
Section 7 COPIER MANAGEMENT
7-93
Repeat copying ON/OFF
Perform the following procedure to set whether or not to prohibit
repeat copying, as well as whether or not to make repeat copying
the default setting in the initial mode.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-67.)
Inch specifications
Metric specifications
2
Select “Repeat Copy” under the “Default menu” column on
the left side of the touch panel and then press the “Change
#” key.
The “Repeat Copy” screen will be displayed.
Inch specifications
Metric specifications
3
If you want to prohibit repeat copying, press the “Off” key.
If you want to make repeat copying the default setting in
the initial mode, press the “On” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Copy default
Preset limit
Repeat Copy
Display register key
Customize(Basic Screen)
Customize(User Choice)
999 Set
On / Default Off
On
CloseBack
Default setting - Copy default
Select ON to activate Repeat Copy or OFF
to inactivate it.
Repeat Copy
Function Default
On
Off
On
Off