Kyocera C4008 Copier User Manual


 
Section 7 COPIER MANAGEMENT
7-38
Total count for specified paper size (1 to 5)
Perform the following procedure when you want to register a
specific paper size in order to calculate and check the copy counts
for that particular size of paper. It is also possible to register a
paper size AND type.
NOTES
You can register up to 5 different paper sizes for this
function.
If the type of paper is not registered in any of the
settings, the corresponding copy counts for that size of
paper will be calculated regardless of the type of paper
that is used. However, if the same size of paper is
registered in another setting along with a paper type,
the counts for the first setting will NOT include copies
made with the type of paper that is registered in the
second setting.
1
Select one of the “Total size 1” through “Total size 5”
settings under the “Setting item” column on the left side of
the touch panel and then press the “Change #” key.
The corresponding setting screen will be displayed.
Inch specifications
Metric specifications
2
Press the “On” key.
Inch specifications
Metric specifications
3
Press the “Select size” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.