Filter
Top Products
Section 7 COPIER MANAGEMENT
7-10
Restrictions (All)
Perform the following procedure when you want to set the
maximum number of copies and printouts that can be made under
the corresponding department ID-code. This limit will apply to the
number of copies AND printouts that can be made in total.
NOTES
• This setting limits the maximum number of copies and
printouts that can be made in all copy modes (full color
and black and white).
• This setting will not be available when “Is not
permitted” is selected for both the “Copying
privileges ON/OFF” and the “Printing privileges
ON/OFF” settings.
1
Access the screen that contains the copy restriction setting
items.
(See “Accessing the copy management menu screen”
on page 7-3 or “Change restrictions for use” on
page 7-23.)
Inch specifications
Metric specifications
2
Select “Limitation (All)” under the “Setting item” column
on the left side of the touch panel and then press the
“Change #” key.
The “Limitation (All)” screen will be displayed.
Inch specifications
Metric specifications
3
To set the maximum limit for copying and printing under
this ID-code, press the “Counter limit” key and proceed to
the next step.
To allow unlimited copying and printing, press the “No
limit” key and then proceed to step 5.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.