Filter
Top Products
Section 7 COPIER MANAGEMENT
7-13
3
To set the maximum number of originals that can be
scanned under this ID-code, press the “Counter limit” key
and proceed to the next step.
To allow unlimited scanning, press the “No limit” key, and
to cancel scanning privileges completely, press the “Is not
permitted” key and proceed to step 5.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Use the numeric keys on the keypad to enter the maximum
number of originals that can be scanned under this ID-code.
The scanning limit can be set to any 1-page increment up to
999,999.
Inch specifications
Metric specifications
5
Press the “Close” key.
The touch panel will return to the screen in step 2.
Fax transmission restrictions
Perform the following procedure when you want to set the
maximum number of documents that can be transmitted under the
corresponding department ID-code when the optional Fax Kit is
installed in your copier.
NOTE
This setting will only be available when “On” is selected
as the “Fax function management ON/OFF” setting.
1
Access the screen that contains the copy restriction setting
items.
(See “Accessing the copy management menu screen”
on page 7-3 or “Change restrictions for use” on
page 7-23.)
Inch specifications
Metric specifications
2
Select “Fax Transm. Limitation” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Fax Transm. Limitation” screen will be displayed.
Inch specifications
Metric specifications