Filter
Top Products
Section 7 COPIER MANAGEMENT
7-56
Default operation mode
Perform the following procedure to set whether the display that
appears after power is turned on to the copier will be the one for
the copy operation mode or for the fax operation mode.
NOTE
This setting is only available when the optional Fax Kit is
installed in your copier.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-44.)
Inch specifications
Metric specifications
2
Select “Select the main mode” [“Select main mode”] under
the “Default menu” column on the left side of the touch
panel and then press the “Change #” key.
The “Select the main mode” [“Select main mode”] screen
will be displayed.
Inch specifications
Metric specifications
3
Select the “Copy mode” key or the “FAX mode” key, as
appropriate.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report