Filter
Top Products
Section 7 COPIER MANAGEMENT
7-95
Customize screen layout (Basic Screen)
Perform the following procedure to change the order of the main
functions and modes that are displayed in the “Basic” and the
“User choice” tabs in order to make the display more appropriate to
the way you use the copier.
1
Display the “Copy default” screen.
(See “Accessing the copy default settings” on
page 7-67.)
Inch specifications
Metric specifications
2
Select “Customize(Basic Screen)” under the “Default menu”
column on the left side of the touch panel and then press
the “Change #” key.
The “Customize(Basic Screen)” screen will be displayed.
Inch specifications
Metric specifications
3
If you want to change the order of the basic functions and
modes, press the “T” or the “S” cursor key to select the
item you want to move. Then press the “Move Ahead” key
or the “Move Behind” [“Move backward”] key to move that
item and change the order of display. The final display of
the basic functions and modes will be in accordance with
the numbers in the list and those shown in the tabs to the
left of that list.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Copy default
Preset limit
Repeat Copy
Display register key
Customize(Basic Screen)
Customize(User Choice)
999 Set
On / Default Off
On