Filter
Top Products
Section 7 COPIER MANAGEMENT
7-15
3
To set the maximum number of copies that can be made
under this ID-code, press the “Counter limit” key and
proceed to the next step.
To allow unlimited copies, press the “No limit” key, and to
cancel copying privileges completely, press the “Is not
permitted” key and proceed to step 5.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Use the numeric keys on the keypad to enter the maximum
number of copies that can be made under this ID-code. The
copy limit can be set to any 1-page increment up to 999,999.
Inch specifications
Metric specifications
5
Press the “Close” key.
The touch panel will return to the screen in step 2.
Copying restrictions (Full color)
Perform the following procedure when you want to set the
maximum number of full color copies that can be made under the
corresponding department ID-code.
NOTES
• This setting will not be available when “Is not
permitted” is selected as the “Copying restrictions
(All)” setting.
• Even if a department ID-code does not exceed the limit
that is designated under this setting, further use of the
machine will be canceled or an error message will
appear if the limit that is designated under the
“Copying restrictions (All)” setting is exceeded.
1
Access the screen that contains the copy restriction setting
items.
(See “Accessing the copy management menu screen”
on page 7-3 or “Change restrictions for use” on
page 7-23.)
Inch specifications
Metric specifications
2
Select “Copy limit. (Full-Co.)” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Copy limit. (Full-Co.)” screen will be displayed.
Inch specifications
Metric specifications