Filter
Top Products
Section 9 TROUBLESHOOTING
9-9
Misfeed in the paper conveyor unit
If a misfeed has occurred in the paper conveyor unit, perform the
following procedure to remove the jammed paper.
* The following display will be displayed after you pull out the
paper conveyor unit in step 2.
Inch specifications
Metric specifications
1
Open the front cover.
2
Operate the paper conveyor release lever and pull the
paper conveyor unit out towards you as far as it will go.
3
Push the green release lever (shown as (1) in the
illustration) down to the right, and remove the jammed
paper without tearing it.
NOTE
If the paper does happen to tear, remove any loose scraps
from inside the copier.
WARNING
High voltage is present in the charger section.
Take sufficient care when working in this area, as
there is a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there
is a danger of getting burned.
(1)