Filter
Top Products
Section 7 COPIER MANAGEMENT
7-58
Silent mode ON/OFF
Perform the following procedure to set whether or not to use the
silent mode which shortens the length of time that the laser data
writing motor continues to spin after each copy job is finished. Turn
the silent mode ON if the noise of the motor bothers you in any
way.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-44.)
Inch specifications
Metric specifications
2
Select “Silent mode” under the “Default menu” column on
the left side of the touch panel and then press the “Change
#” key.
The “Silent mode” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “On” key if you want to use the silent mode.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report