Filter
Top Products
Section 6 OTHER CONVENIENT FUNCTIONS
6-73
22
Press the “Insert page” [“Insert blank page”] key.
Inch specifications
Metric specifications
23
The job build set-up procedure is complete.
Press the “Scanning finished” key. Copying will start.
Inch specifications
Metric specifications
24
If there are no problems with the copy set you made, then
you can use the repeat copy mode to make any additional
number of copy sets as desired (see “Printing out with
the repeat copy mode” on page 6-50).
Selecting the settings and functions
Selecting the paper
This procedure selects the size of the copy paper.
1
With the content of the “Basic” tab displayed, press the
“Select paper” key.
The “Select paper” screen will be displayed.
Inch specifications
Metric specifications
2
Press the key that corresponds to the drawer[cassette]
which contains the desired size of copy paper, and then
press the “Close” key.
The touch panel will return to the screen in step 1.
Inch specifications
Metric specifications
set
Cancel
Job Build - Step7
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1 sided 2 sided copy
Offset Auto % Top Edge
Select
paper
Original
type
1 sided/
2 sided
Finished
Reduce
/Enlarge
Orig. set
direction
Insert
page
2 sided copy-Left
Finished page #:8
Next copy page: Front
Print from
Rear page
Scanning
finished
Basic Quality Edit
11x8
1
/2
set
Cancel
Job Build - Step8
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1 sided 2 sided copy
Offset Auto % Top Edge
Select
paper
Original
type
1 sided/
2 sided
Finished
Reduce
/Enlarge
Orig. set
direction
Insert
page
2 sided copy-Left
Finished page #:10
Next copy page: Front
Print from
Rear page
Scanning
finished
Basic Quality Edit
11x8
1
/2
1 sided 1 sided copy
Offset
Basic Quality Edit
Auto % Top Edge
Select
paper
Original
type
1 sided/
2 sided
Finished
Reduce
/Enlarge
Orig. set
direction
Insert
page
1 sided copy-Left
Finished page #: 0
Ready to Job build.(Full-color)
Place originals then press Start key.
set
Job Build - Step 1
End
11x8
1
/2
Ready to Job build.(Full-color)
Set
Back Close
Place originals then press Start key.
Select paper
Plain
MP tray
Plain
Plain
Color
11x8
1
/2
11x8
1
/2
11x8
1
/2