Filter
Top Products
Section 7 COPIER MANAGEMENT
7-59
Day & time
Perform the following procedure to set the current date and time.
NOTE
BE SURE to perform the “Time difference” setting prior
to setting the day and time.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-44.)
Inch specifications
Metric specifications
2
Select “Date/Time” under the “Default menu” column on
the left side of the touch panel and then press the “Change
#” key.
The “Date/Time” screen will be displayed.
Inch specifications
Metric specifications
3
Press the “+” key or the “-” key to change the displayed
information for each field (“Year”, “Month”, “Day” and
“Time”) to the current time and date.
If you want the time to be automatically calculated for
daylight savings time, press the “On” key under
“Summertime”.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 2.
4
Press the “Close” key.
The touch panel will return to the screen in step 2.
5
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
6
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
MP tray
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting modeDefault menu
Default setting
Machine default
Silent mode
Date/Time
Time difference
Management code change
Auto sleep
Off
01/01/’03 14:00
GMT+00:00
4000
On