Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
Selective LUNs Menu (Command Line Option -m)
SN0054614-00 F 4-49
A
4.6.2.1
Display Target Persistent Binding
6: Target Persistent Binding p: All HBAs 1: Display Configuration
When you select the Display Configuration option, the following information
appears. (Or, the message, No target persistent binding configuration on HBA
instance n appears instead):
Bind status (Yes)
Device type (Disk, for example)
Target information (model name and number, for example)
Port Name
Port ID
Target ID
4.6.2.2
Target Persistent Binding – Bind Targets
6: Target Persistent Binding p: All HBAs 2: Bind Targets
See 4.6.1.2 Target Persistent Bindings – Bind Target(s) (Command Line Option
-p).
4.6.2.3
Target Persistent Binding – Unbind Targets
6: Target Persistent Binding p: All HBAs 3: Unbind Targets
See 4.6.1.3 Target Persistent Binding – Unbind Targets (Command Line Option
-p).
4.7
Selective LUNs Menu
(Command Line Option -m)
7: Selective LUNs
When you select this option, SANsurfer FC HBA CLI shows the Selective LUNs
Menu (see 4.5.2), allowing you to select an individual HBA port or All HBAs.
4.7.1
Selective LUNs (Per HBA Port)
7: Selective LUNs 1: - m: HBA Port Instance
When you select this option, SANsurfer FC HBA CLI shows the following options
for the HBA:
Display LUN Configuration
Manual Configure LUNs